After importing an image, there may be some flaws (overlaying or unconnected lines) that need to be fixed before cutting. Using the Fix Drawing tool can help you quickly fix those flaws.
Quickly scale up or down a drawing using percentages with ‘point and factor’ or using ‘3 points’. As your making the adjustments, you can see both the original size and the changes being made.
Adding a Chamfer corner to your drawing is quick and easy with the MaverickCNC software. Select the two lines, determine the desired parameters and click apply.
Adding a Fillet/Radius corner to your drawing is quick and easy with the MaverickCNC software. Select the two lines, determine the desired parameters and click apply.