In this episode, Jim Colt talks about the air and filter requirements for a cutting machine. While its important to keep the air that flows through your air plasma dry and clean, it isn’t necessary for everyone to purchase a big compressor and expensive air drying equipment. It will mainly pend on where you live. Jim explains this in greater detail, along with the filtration system built into the Hypertherm air plasma.
In this episode, Jim Colt talks about air pressure and quality for a cutting machine. To get the best performance form your plasma cutting system is to have clean, dry and compressed air. The best way to do this is to put filters and water separators ...
WHY LOW AIR PRESSURE IS A PROBLEM FOR PLASMA CUTTING A very common problem with plasma cutting systems is low air pressure and/or insufficient air flow. This is particularly common with air plasma systems, relying on air supplied from a compressor as ...
In this episode, Jim Colt talks about CNC plasma air pressure flow inconsistency. Air pressure flow inconsistency is a common problem that people run into, but it has little to do with the size of the compressor you have. Most likely the issues with ...
WHAT ARE THE AIR REQUIREMENTS FOR PLASMA CUTTING? One important aspect of plasma cutting that is not talked about very often is air requirements. Many believe you will need a large compressor and expensive airdrying equipment in order to run a plasma ...
In this episode, Jim Colt talks about the different metals that can be cut with Air Plasma. Bronze, galvanized, stainless steel, copper…you can plasma cut any conductive metal with plasma. Powermax air plasma cuts aluminum, brass and more!