FEATURES OF THE HYPERTHERM POWERMAX PLASMA SYSTEM

FEATURES OF THE HYPERTHERM POWERMAX PLASMA SYSTEM

HYPERTHERM POWERMAX45XP, 65, 85, 105, 125 PLASMA – WHAT MAKES THEM THE BEST AIR PLASMA SOURCES ON THE MARKET?

MaverickCNC plasma tables utilize Hypertherm’s Powermax line of plasma systems. The systems available are the Powermax 45XP, 65, 85, 105, and the 125. The systems range from 45 amps to 125 amps with the model number designating the units maximum  amperage output (i.e. the Powermax105 is a 105 amp system). The systems support a wide range of production cut capacity from as thin as 22GA all the way up to 1½”.

All of the Powermax system come fully integrated to the MaverickCNC plasma table and all cut charts and parameters are preloaded. The Powermax mechanized torch is installed and works seamlessly with the automatic torch height control system. The standard quick disconnect option allows for easy switch over to a hand torch and lead (optional) allowing for manual cutting applications.

All the Powermax systems are designed to be user friendly with simple to operate controls. The amperage setting is digitally displayed on the LCD control panel as well as diagnostics and error codes for easy trouble shooting. The mode selector knob enables selection of cut modes including mechanized, hand, expanded metal, and gouging options. Smart Sense technology automatically adjust gas pressure, reducing manual adjustments and maximizing uptime.

    • Related Articles

    • VIDEO HYPERTHERM POWERMAX PLASMA CUTTER

      In this episode, Jim Colt goes into detail about the Hypertherm Powermax Plasma Cutter.

    • VIDEO AIR PLASMA ERROR CODES ON HYPERTHERM POWERMAX

      In this episode, Jim Colt talks about air plasma error codes on Hypertherm Powermax. He goes through the common error codes when starting up your plasma cutting torch. These codes are published in your Hypertherm manual as well as your operator ...

    • Hypertherm Fault Codes

      Hypertherm Fault Codes Sometimes you will get fault alarms on your Powermax. You will see an amber light on the front of the system and a 0-## code on the screen. These will show if you have issues like low air, a stuck consumable or the retaining ...

    • VIDEO CNC PLASMA TABLE FEATURES

      In this episode, Jim Colt talks about the different features of a CNC plasma cutting machine. Fume control, air quality different types of metals and the technical aspects of making the best of the cutting process are just a few of the features Jim ...

    • AIR REQUIREMENT FOR PLASMA CUTTING

      WHAT ARE THE AIR REQUIREMENTS FOR PLASMA CUTTING? One important aspect of plasma cutting that is not talked about very often is air requirements. Many believe you will need a large compressor and expensive airdrying equipment in order to run a plasma ...